User Tools

Site Tools


Sidebar

Strips, Stripes or Slices

  • How to split any Image into any number of Strips, Stripes or Slices.

The method described will split any Image - any Aspect Ratio - into the desired number of Strips. It is important to choose the number of strips carefully and work in percentages and not in pixels mode. For instance:

  • For 2 Strips each strip will be 50% of the Width/Height.
  • For 4 Strips each strip will be 25% of the Width/Height…….
  • For 32 Strips each strip will be 3.125% of the Width/Height.
  • For 64 Strips each strip will be 1.5625% of the Width/Height.

It is also important to add any recurring feature during the construction e.g. Key Frames, Opacity etc

There are two types of construction - Linked and Un-linked - Linked Strips are ideal for Page Turning Effects and Un-Linked Strips are more suitable for Blinds or effects where each strip acts independently of all other strips.

I will describe each one separately.

LINKED STRIPS

  • I will describe the method for dividing an Image into 32 equal sized VERTICAL Strips
  • In Objects and Animation (O&A):
  • Add your Image (Object) for use as a FRAME. If a Style will be made add an INDEX NUMBER at this stage
  • Add an END Key Frame
  • To use this Image as a Frame you can EITHER turn OFF both Back and Front Sides or turn its Opacity to zero
  • Copy this Image (Frame) and Paste it to itself (Parent / Child)
  • In the Copied Version the Front and/or Back Sides and/or Opacity can be turned back on
  • In O&A / Properties click on IMAGE CROP and set its mode to PERCENTAGE (%)
  • Each Strip for the 32 Strip Example is going to be 3.125% wide (100/32=0.03125)
  • Leaving the LEFT box set to zero, change the RIGHT Box to 96.875% (100-3.125)
  • In O&A Animations set the CENTRE value to -100 and the PAN X Value to -100% - this will move the Strip to the far left relative to its Frame

strips-01.jpg

  • Copy this Strip and Paste to itself (Parent and Child)
  • Change the Pan X to +100 - this will move the new strip to the right hand edge of its parent
  • In Properties change the Right box value to 93.75% and the Left box value to 3.125%

strips-02.jpg

  • Copy Strip 2 and Paste to itself (Parent and Child)
  • At this point no further changes to the Pan X value are necessary
  • In Properties change the Right box value to 90.625% and the Left box value to 6.25%

strips-03.jpg

  • Continue as above - subtracting 3.125% from the Right Box previous value and adding 3.125% to the Left Box previous value until all 32 Strips are completed

strips-04.jpg

  • At this point a Style can be made which will save having to go through the process again
  • The Style will convert any Image - any Aspect ratio or resolution - to 32 Strips (Linked)

UNLINKED STRIPS

  • In Objects and Animation (O&A):
  • Add your Image (Object) for use as a FRAME. If a Style will be made add an INDEX NUMBER at this stage
  • Add an END Key Frame
  • To use this Image as a Frame you can EITHER turn OFF both Back and Front Sides or turn its Opacity to zero
  • Copy this Image (Frame) and Paste it to itself (Parent / Child)
  • In the Copied Version the Front and/or Back Sides and/or Opacity can be turned back on
  • In O&A / Properties click on IMAGE CROP and set its mode to PERCENTAGE (%)
  • Each Strip for the 32 Strip Example is going to be 3.125% wide (100/32=0.03125)
  • Leaving the LEFT box set to zero, change the RIGHT Box to 96.875% (100-3.125)
  • In O&A Animations set the CENTRE value to ZERO and the PAN X Value to -96.875% - this will move the Strip to the far left relative to its Frame

strips-06.jpg

  • Copy this Image and paste to the FRAME IMAGE - this Image is now a CHILD of the FRAME but independent of the First Image
  • Note that in Spacial Terms it is also ABOVE the First Image
  • In O&A Properties set the Right Box to -93.75% and the Left Box to 3.125%
  • In O&A Animations set the PAN X to -90.625% (i.e. ADD 6.25% to the previous value)

strips-07.jpg

  • Copy the second Image and Paste it to the FRAME - this Image is now a CHILD of the FRAME but independent of the First and Second Images
  • Note that in Spacial Terms it is also ABOVE the First and Second Images
  • In O&A Properties set the Right Box to -90.625% and the Left Box to 6.25%
  • In O&A Animations set the PAN X to -84.375% (i.e. ADD 6.25% to the previous value)

strips-08.jpg

  • Continue as above until all 32 Strips are completed
    • Add 3.125% to the Left Box previous value
    • Subtract 3.125% from the Right Box previous value
    • Add 6.25% to the Pan X previous value
  • until all 32 Strips are Completed

…..Work in progress…..

en-us/10.0/how_to_v10/slices.txt · Last modified: 2022/12/19 11:48 (external edit)