User Tools

Site Tools


Differences

This shows you the differences between two versions of the page.

Link to this comparison view

en-us:9.0:techniques:basic_av_creation [2014/03/23 12:15]
en-us:9.0:techniques:basic_av_creation [2022/12/18 11:20] (current)
Line 24: Line 24:
 Suppose you have a digital camera whose RAW image size is 4605 x 3072 (i.e. an aspect ratio of 3:2). You want to show the final version of your PicturesToExe project on your high definition TV with a resolution of 1920 x 1080 (i.e. an aspect ratio of 16:9). If you do not crop the image to the same aspect ratio as your TV, the image will not fill the screen. The first figure below shows a 4605 x 3072(3:2) image in a window sized in PicturesToExe to an aspect ratio of 3:2. The image fills the available display area. The second figure shows the same image in a window whose aspect ratio is 16:9. Suppose you have a digital camera whose RAW image size is 4605 x 3072 (i.e. an aspect ratio of 3:2). You want to show the final version of your PicturesToExe project on your high definition TV with a resolution of 1920 x 1080 (i.e. an aspect ratio of 16:9). If you do not crop the image to the same aspect ratio as your TV, the image will not fill the screen. The first figure below shows a 4605 x 3072(3:2) image in a window sized in PicturesToExe to an aspect ratio of 3:2. The image fills the available display area. The second figure shows the same image in a window whose aspect ratio is 16:9.
  
-{{:en:techniques:basic_av_01a.jpg?direct|}} +{{en-us:9.0:techniques:basic_av_01a.jpg?direct|}} 
  
-{{:en:techniques:basic_av_02b1.jpg?direct|}}+{{en-us:9.0:techniques:basic_av_02b1.jpg?direct|}}
  
  
Line 43: Line 43:
  
 ==== Insertion and Sorting ==== ==== Insertion and Sorting ====
-Once the images required for the show have been selected, edited, resized and saved as jpg files in the project directory, the next step is to insert them into PicturesToExe  and sort them into the required order. Prior to insertion, it is good practice to set up any preferences or project options that are to be applicable to the show. Ideally a template has been set up with the required parameters and saved as a master template (see [[en:main_menu:preferences|templates]]. Then all new shows will use the same parameters. The figure below shows PicturesToExe Main window, with  typical "File List" and File Tree" and the "Mini Player" showing a view of the first image in the "File List".+Once the images required for the show have been selected, edited, resized and saved as jpg files in the project directory, the next step is to insert them into PicturesToExe  and sort them into the required order. Prior to insertion, it is good practice to set up any preferences or project options that are to be applicable to the show. Ideally a template has been set up with the required parameters and saved as a master template (see [[en-us:9.0:main_menu:preferences|templates]]. Then all new shows will use the same parameters. The figure below shows PicturesToExe Main window, with  typical "File List" and File Tree" and the "Mini Player" showing a view of the first image in the "File List".
  
-{{:en:techniques:basic_av_03.jpg?direct|}}+{{en-us:9.0:techniques:basic_av_03.jpg?direct|}}
  
 To insert all images into the "Slide list", either right-click in the "File List" and select, "Add all files to Project", or press Ctrl + D and the selected images will be added to the "Slide list". The figure below shows the "Slide list" with the images added. To insert all images into the "Slide list", either right-click in the "File List" and select, "Add all files to Project", or press Ctrl + D and the selected images will be added to the "Slide list". The figure below shows the "Slide list" with the images added.
  
-{{:en:techniques:basic_av_04.jpg?direct|}}+{{en-us:9.0:techniques:basic_av_04.jpg?direct|}}
  
 //A Note on adding images :If subsequently further images are added, they can be selected from the "File List", left-clicked and dragged to the "Slide  list". They will be inserted at the position to which they are dragged and images to their right will be pushed along to the right. At the beginning of a project this may not cause a problem. However if images have been re-organised on the "Timeline" this may destroy the current sequence. If the "Timeline" view is selected first, an image can be dragged to a particular point on the "Timeline" and the images to the right can be carefully re-adjusted.// //A Note on adding images :If subsequently further images are added, they can be selected from the "File List", left-clicked and dragged to the "Slide  list". They will be inserted at the position to which they are dragged and images to their right will be pushed along to the right. At the beginning of a project this may not cause a problem. However if images have been re-organised on the "Timeline" this may destroy the current sequence. If the "Timeline" view is selected first, an image can be dragged to a particular point on the "Timeline" and the images to the right can be carefully re-adjusted.//
Line 55: Line 55:
 Once images have been added to the "Slide list", they can be sorted into the desired order. This is easily achieved using the "Full Slide Window" opened by clicking on the small inverted triangle the left of the "Slides" button as shown below. Once images have been added to the "Slide list", they can be sorted into the desired order. This is easily achieved using the "Full Slide Window" opened by clicking on the small inverted triangle the left of the "Slides" button as shown below.
  
-{{:en:techniques:basic_av_05.jpg?direct|}}+{{en-us:9.0:techniques:basic_av_05.jpg?direct|}}
  
 This will open a full screen view of all images (or a full screen view of the "Timeline" if in "Timeline" view) and individual images can be dragged into the required order.  Once complete, the "Full Screen" button is clicked again and the screen returns to either the "Slide list" or "Timeline" view. This will open a full screen view of all images (or a full screen view of the "Timeline" if in "Timeline" view) and individual images can be dragged into the required order.  Once complete, the "Full Screen" button is clicked again and the screen returns to either the "Slide list" or "Timeline" view.
Line 68: Line 68:
 As already mentioned, it is best practice to have a clear idea of what you expect the end result of your show to comprise. In some cases, the author will have had a clear idea before starting, prepared a story line and taken images to match that story. However often the author will have taken a number of images and afterwards decided to use these to make a show with supporting commentary. Whichever situation applies, a useful method for creating commentary is to use whatever text editor is available and prepare the text taking into account the available images. An example is shown below where Microsoft Word was used to prepare a commentary for an AV about a local village. Using this method, Slide numbers, slide timing, and small thumbnails of the associated images are inserted into a table and the commentary added. In this way the commentary sections are clearly identified with one or more images and it is easy to edit the text or add or change image thumbnails. Of course there are many other methods that can be used and authors should select the most appropriate for their abilities and equipment available. As already mentioned, it is best practice to have a clear idea of what you expect the end result of your show to comprise. In some cases, the author will have had a clear idea before starting, prepared a story line and taken images to match that story. However often the author will have taken a number of images and afterwards decided to use these to make a show with supporting commentary. Whichever situation applies, a useful method for creating commentary is to use whatever text editor is available and prepare the text taking into account the available images. An example is shown below where Microsoft Word was used to prepare a commentary for an AV about a local village. Using this method, Slide numbers, slide timing, and small thumbnails of the associated images are inserted into a table and the commentary added. In this way the commentary sections are clearly identified with one or more images and it is easy to edit the text or add or change image thumbnails. Of course there are many other methods that can be used and authors should select the most appropriate for their abilities and equipment available.
  
-{{:en:techniques:basic_av_06.jpg?direct|}}+{{en-us:9.0:techniques:basic_av_06.jpg?direct|}}
  
 Once completed, the commentary needs to be recorded. A suggested method is to record the whole commentary in one go using a small portable recorder (for example a "Zoom H2" recorder whose SD card can be removed on completion and inserted into the computer to transfer the resulting audio file into the project directory). If during the "take", a mistake is made, just say "correction" and repeat the section where a mistake was made. In this way the tone and timbre of the voice will have a reasonably even tone throughout. Experience has shown that a recording made over a period of time (say on successive days) can have quite a variation in timbre which becomes very obvious when the show is finally played.  Once completed, the commentary needs to be recorded. A suggested method is to record the whole commentary in one go using a small portable recorder (for example a "Zoom H2" recorder whose SD card can be removed on completion and inserted into the computer to transfer the resulting audio file into the project directory). If during the "take", a mistake is made, just say "correction" and repeat the section where a mistake was made. In this way the tone and timbre of the voice will have a reasonably even tone throughout. Experience has shown that a recording made over a period of time (say on successive days) can have quite a variation in timbre which becomes very obvious when the show is finally played. 
Line 74: Line 74:
 The next step is to insert the finished audio file into a audio editor. The Audacity editor which is free to download, is often a popular choice. Other possible audio editors include Adobe's Audition 3.0. As can be seen from the sample commentary file, sections of commentary are associated with one or more images. Thus a useful technique is to extract these sections of commentary and save them as separate files which can be inserted into the "Audio" tab of the project. The figure below shows a typical audio tab in which a number of commentary sections have been added. The next step is to insert the finished audio file into a audio editor. The Audacity editor which is free to download, is often a popular choice. Other possible audio editors include Adobe's Audition 3.0. As can be seen from the sample commentary file, sections of commentary are associated with one or more images. Thus a useful technique is to extract these sections of commentary and save them as separate files which can be inserted into the "Audio" tab of the project. The figure below shows a typical audio tab in which a number of commentary sections have been added.
  
-{{:en:techniques:basic_av_07.jpg?direct|}}+{{en-us:9.0:techniques:basic_av_07.jpg?direct|}}
  
 As can been seen from the figure, each commentary section has been added to a single track called "Commentary". Now each commentary section can be associated with its relevant slides in the "Timeline" window. Here one of the  great features of PicturesToExe can be used : the ability to lock a clip to a particular slide. A portion of a typical "Timeline" view shown in full screen mode is shown below.  There are 3 tracks ; a "Commentary" track, a "Music" track and a "Sound effects" track. The "Commentary clip "S25.mp3" is locked to Slide 24. This is achieved by ensuring the clip is underneath the appropriate slide, selecting the clip, right-clicking, and selecting "Link audio clip to slide XX" Now although the clip can be moved along the timeline, it is locked to the slide so that if the slide moves, so does the clip. This makes the adjustment of slide and clip positions so much easier in any final editing of the project. As can been seen from the figure, each commentary section has been added to a single track called "Commentary". Now each commentary section can be associated with its relevant slides in the "Timeline" window. Here one of the  great features of PicturesToExe can be used : the ability to lock a clip to a particular slide. A portion of a typical "Timeline" view shown in full screen mode is shown below.  There are 3 tracks ; a "Commentary" track, a "Music" track and a "Sound effects" track. The "Commentary clip "S25.mp3" is locked to Slide 24. This is achieved by ensuring the clip is underneath the appropriate slide, selecting the clip, right-clicking, and selecting "Link audio clip to slide XX" Now although the clip can be moved along the timeline, it is locked to the slide so that if the slide moves, so does the clip. This makes the adjustment of slide and clip positions so much easier in any final editing of the project.
  
-{{:en:techniques:basic_av_08a.jpg?direct|}}+{{en-us:9.0:techniques:basic_av_08a.jpg?direct|}}
  
  
  
-One other feature of the latest PicturesToExe version is the ability to alter the volume of tracks. As shown below, clicking on the icon enables volume adjustments and the blue points are where the sound levels have been increased or decreased.  More information is given in the section on Timeline view (see [[en:main-window:the_timeline]]).+One other feature of the latest PicturesToExe version is the ability to alter the volume of tracks. As shown below, clicking on the icon enables volume adjustments and the blue points are where the sound levels have been increased or decreased.  More information is given in the section on Timeline view (see [[en-us:9.0:main-window:the_timeline]]).
  
-{{:en:techniques:basic_av_09a.jpg?direct|}}+{{en-us:9.0:techniques:basic_av_09a.jpg?direct|}}
  
 ==== Music/sound Effects ==== ==== Music/sound Effects ====
Line 94: Line 94:
 The process of adding music and sound effect clips is identical to that described above for commentary clips. Separate tracks are recommended and the figure below shows part of a typical audio tab with separate music and sound effect tracks indicated. The process of adding music and sound effect clips is identical to that described above for commentary clips. Separate tracks are recommended and the figure below shows part of a typical audio tab with separate music and sound effect tracks indicated.
  
-{{:en:techniques:basic_av_10.jpg?direct|}}+{{en-us:9.0:techniques:basic_av_10.jpg?direct|}}
  
 ==== The Final Edit ==== ==== The Final Edit ====
Line 102: Line 102:
 ==== Publishing ==== ==== Publishing ====
  
-The Main Help menu covers the options for publishing (see [[en:main_menu:publish]]) and no further comment is required here.+The Main Help menu covers the options for publishing (see [[en-us:9.0:main_menu:publish]]) and no further comment is required here.
  
 ==== Tidying Up ==== ==== Tidying Up ====
  
-During the process of creating an audio visual show, a project folder may have been created (this is recommended) and images and sound clips added. Some images may not have been used as main image items, but added as supplementary items to individual images.  In The "File List", images used as main images on the "Slide list" have their file name in bold and therefore it is easy to see which have been used and which rejected.  But images added additionally to main images in the "Objects and "Animation editor are not so identified. This the final tidying up process should be to make a project backup using the "Create Backup in ZIP" (see [[en:main_menu:file]]). This creates a single zip file which includes all elements (images and sound clips) used in the show, together with the original PicturesToExe project file (*.pte). this then can be stored and backed up if required and is an essential source for any future work on the project.+During the process of creating an audio visual show, a project folder may have been created (this is recommended) and images and sound clips added. Some images may not have been used as main image items, but added as supplementary items to individual images.  In The "File List", images used as main images on the "Slide list" have their file name in bold and therefore it is easy to see which have been used and which rejected.  But images added additionally to main images in the "Objects and "Animation editor are not so identified. This the final tidying up process should be to make a project backup using the "Create Backup in ZIP" (see [[en-us:9.0:main_menu:file]]). This creates a single zip file which includes all elements (images and sound clips) used in the show, together with the original PicturesToExe project file (*.pte). this then can be stored and backed up if required and is an essential source for any future work on the project.
  
en-us/9.0/techniques/basic_av_creation.1395576908.txt.gz ยท Last modified: 2022/12/18 11:20 (external edit)