PTE AV Studio

User Tools

Site Tools

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
en-us:11.0:how_to_v10:slices [2020/05/28 21:01]
davegee [LINKED STRIPS] 		en-us:11.0:how_to_v10:slices [2022/12/19 12:10] (current)
admin236548 ↷ Links adapted because of a move operation
Line 1: Line 1:
 ====== Strips, Stripes or Slices ====== ====== Strips, Stripes or Slices ======
  
-  * How to split any Image into any number of Strips, Stripes or Slices.+    * How to split any Image into any number of Strips, Stripes or Slices.
  
 The method described will split any Image - any Aspect Ratio - into the desired number of Strips. It is important to choose the number of strips carefully and work in percentages and not in pixels mode. For instance: The method described will split any Image - any Aspect Ratio - into the desired number of Strips. It is important to choose the number of strips carefully and work in percentages and not in pixels mode. For instance:
  
-  * For 2 Strips each strip will be 50% of the Width/Height. +    * For 2 Strips each strip will be 50% of the Width/Height. 
-  * For 4 Strips each strip will be 25% of the Width/Height.......+    * For 4 Strips each strip will be 25% of the Width/Height…….
  
-  * For 32 Strips each strip will be 3.125% of the Width/Height. +    * For 32 Strips each strip will be 3.125% of the Width/Height. 
-  * For 64 Strips each strip will be 1.5625% of the Width/Height.+    * For 64 Strips each strip will be 1.5625% of the Width/Height.
  
 It is also important to add any recurring feature during the construction e.g. Key Frames, Opacity etc It is also important to add any recurring feature during the construction e.g. Key Frames, Opacity etc
  
-There are two types of construction - Linked and Un-linked - Linked Strips are ideal for Page Turning Effects and Un-Linked Strips are more suitable for Blinds or effects where each strip acts independently of all other strips. +There are two types of construction - Linked and Un-linked - Linked Strips are ideal for Page Turning Effects and Un-Linked Strips are more suitable for Blinds or effects where each strip acts independently of all other strips.
  
 I will describe each one separately. I will describe each one separately.
Line 19: Line 19:
 ===== LINKED STRIPS ===== ===== LINKED STRIPS =====
  
-  * I will describe the method for dividing an Image into 32 equal sized VERTICAL Strips +    * I will describe the method for dividing an Image into 32 equal sized VERTICAL Strips 
-  * In Objects and Animation (O&A):+    * In Objects and Animation (O&A):
  
-  * Add your Image (Object) for use as a FRAME. If a Style will be made add an INDEX NUMBER at this stage +    * Add your Image (Object) for use as a FRAME. If a Style will be made add an INDEX NUMBER at this stage 
-  * Add an END Key Frame  +    * Add an END Key Frame 
-  * To use this Image as a Frame you can EITHER turn OFF both Back and Front Sides or turn its Opacity to zero+    * To use this Image as a Frame you can EITHER turn OFF both Back and Front Sides or turn its Opacity to zero
  
-  * Copy this Image (Frame) and Paste it to itself (Parent / Child) +    * Copy this Image (Frame) and Paste it to itself (Parent / Child) 
-  * In the Copied Version the Front and/or Back Sides and/or Opacity can be turned back on  +    * In the Copied Version the Front and/or Back Sides and/or Opacity can be turned back on 
-  * In O&A / Properties click on IMAGE CROP and set its mode to PERCENTAGE (%) +    * In O&A / Properties click on IMAGE CROP and set its mode to PERCENTAGE (%) 
-  * Each Strip for the 32 Strip Example is going to be 3.125% wide (100/32=0.03125) +    * Each Strip for the 32 Strip Example is going to be 3.125% wide (100/32=0.03125) 
-  * Leaving the LEFT box set to zero, change the RIGHT Box to 96.875% (100-3.125) +    * Leaving the LEFT box set to zero, change the RIGHT Box to 96.875% (100-3.125) 
-  * In O&A Animations set the CENTRE value to -100 and the PAN X Value to -100% - this will move the Strip to the far left relative to its Frame+    * In O&A Animations set the CENTRE value to -100 and the PAN X Value to -100% - this will move the Strip to the far left relative to its Frame
  
-{{:en-us:10.0:how_to_v10:strips-01.jpg|}}+{{en-us:11.0:how_to_v10:strips-01.jpg}}
  
-  * Copy this Strip and Paste to itself (Parent and Child) +    * Copy this Strip and Paste to itself (Parent and Child) 
-  * Change the Pan X to +100 - this will move the new strip to the right hand edge of its parent +    * Change the Pan X to +100 - this will move the new strip to the right hand edge of its parent 
-  * In Properties change the Right box value to 93.75% and the Left box value to 3.125%+    * In Properties change the Right box value to 93.75% and the Left box value to 3.125%
  
-{{:en-us:10.0:how_to_v10:strips-02.jpg|}}+{{en-us:11.0:how_to_v10:strips-02.jpg}}
  
 +    * Copy Strip 2 and Paste to itself (Parent and Child)
 +    * At this point no further changes to the Pan X value are necessary
 +    * In Properties change the Right box value to 90.625% and the Left box value to 6.25%
 +
 +{{en-us:11.0:how_to_v10:strips-03.jpg}}
 +
 +    * Continue as above - subtracting 3.125% from the Right Box previous value and adding 3.125% to the Left Box previous value until all 32 Strips are completed
 +
 +{{en-us:11.0:how_to_v10:strips-04.jpg}}
 +
 +    * At this point a Style can be made which will save having to go through the process again
 +    * The Style will convert any Image - any Aspect ratio or resolution - to 32 Strips (Linked)
 +
 +===== UNLINKED STRIPS =====
 +
 +    * In Objects and Animation (O&A):
 +
 +    * Add your Image (Object) for use as a FRAME. If a Style will be made add an INDEX NUMBER at this stage
 +    * Add an END Key Frame
 +    * To use this Image as a Frame you can EITHER turn OFF both Back and Front Sides or turn its Opacity to zero
 +
 +    * Copy this Image (Frame) and Paste it to itself (Parent / Child)
 +    * In the Copied Version the Front and/or Back Sides and/or Opacity can be turned back on
 +    * In O&A / Properties click on IMAGE CROP and set its mode to PERCENTAGE (%)
 +    * Each Strip for the 32 Strip Example is going to be 3.125% wide (100/32=0.03125)
 +    * Leaving the LEFT box set to zero, change the RIGHT Box to 96.875% (100-3.125)
 +    * In O&A Animations set the CENTRE value to ZERO and the PAN X Value to -96.875% - this will move the Strip to the far left relative to its Frame
 +
 +{{en-us:11.0:how_to_v10:strips-06.jpg}}
 +
 +    * Copy this Image and paste to the FRAME IMAGE - this Image is now a CHILD of the FRAME but independent of the First Image
 +    * Note that in Spacial Terms it is also ABOVE the First Image
 +    * In O&A Properties set the Right Box to -93.75% and the Left Box to 3.125%
 +    * In O&A Animations set the PAN X to -90.625% (i.e. ADD 6.25% to the previous value)
 +
 +{{en-us:11.0:how_to_v10:strips-07.jpg}}
 +
 +    * Copy the second Image and Paste it to the FRAME - this Image is now a CHILD of the FRAME but independent of the First and Second Images
 +    * Note that in Spacial Terms it is also ABOVE the First and Second Images
 +    * In O&A Properties set the Right Box to -90.625% and the Left Box to 6.25%
 +    * In O&A Animations set the PAN X to -84.375% (i.e. ADD 6.25% to the previous value)
 +
 +{{en-us:11.0:how_to_v10:strips-08.jpg}}
 +
 +    * Continue as above until all 32 Strips are completed
 +      * Add 3.125% to the Left Box previous value
 +      * Subtract 3.125% from the Right Box previous value
 +      * Add 6.25% to the Pan X previous value
 +    * until all 32 Strips are Completed
 +
 +{{en-us:11.0:how_to_v10:strips-09.jpg|}}
 +
 +…..Work in progress…..
  
en-us/11.0/how_to_v10/slices.1590699678.txt.gz · Last modified: 2022/12/18 11:20 (external edit)

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International